Model 1500-8.5I

Pressure Indicator Gauge

Series 1500 8.5" Test Gauge

Selected documents
Sales contact




  • Test, laboratory, and production applications

Special Features

  • These gauges have capsule-type pressure elements up to and including the 150-psig ranges of 200 psig and above have Bourdon tubes
  • The pressure to be measured is applied to the capsule or Bourdon tube through a single connection in the case
  • The case has a tempered-glass dial cover, solid-front dial and a blow-out plug on the back
  • Readings are referenced to atmospheric pressure in the case
  • Available in 26 standard ranges (including vacuum and compound ranges), these gauges combine precision-liquid-column accuracy with aneroid convenience
  • They make excellent secondary standards and are rugged enough to maintain accuracy in many test and process applications

Standard Features

This product replaces the Type 612.11.

0.066% of full scale

-30" Hg -1,000 psig

0.03% of full scale

0.01% of full scale

0.1% of full scale for ranges of 150 psi and below;
0.2% of full scale for 200 psi and above

Maximum temperature effect
0.1% of full scale per 10°C/18°F change from reference temperature 23°C/73.4°F

Scale length
Approx. 45" through 2 pointer revolutions

Dial diameter

Pressure element volume
Ranges <150 psi 6.9 cc with pointer at zero 8.6 cc
At full scale ranges 200 psi and above 10 cc.
For the range 0-125" water only 6.3 cc with pointer at zero; 8.0 cc, at full scale

Case pressure
Cases are open to atmosphere.

Case connections
150 psi and below, ⅛" female NPT, 200 psi and above, ¼" female NPT built-in stainless steel filter at the bottom of case

Case construction
Aluminum with tempered-glass window, flush mounted

Zero adjustment
Accessible through both the front and the back of the case


  • Calibration in most metric units available at no extra cost.Other calibration units and dual scale graduations are available at extra cost.
  • Gauge 1500 8.5" is available installed in a compact, suitcase-type carrying case with a mounted panel for the gauge. The cover is easily removed and connections can be made without removing the gauge from the case

Note: Gases must be non-corrosive, no liquid service.

Weight and shipping weight
12 lbs.

Ordering information
Please specify ordering number, range, and mounting angle, (extra cost if mounting angle other than vertical)

Pressure Indicator Gauge
  • Pressure Indicator Gauge
Wish list - Documents (0)

There are currently no documents on your wish list. You can add any document from the download area to your wish list. To do this, select the desired language using the flag symbol.

The maximum number of 20 entries was reached.

To receive your download link via e-mail, enter your address here:

The e-mail address is invalid.