Temperature Switches

Temperature switches are used in a variety of industrial and technical processes. If a preset temperature is reached, then the temperature switch opens or closes a corresponding switch contact. Depending on the requirements, mechanical or electronic switches can be used. In WIKA's broad product range, you will find the right temperature switch for every application.

Sales contact

WIKA Instrument, LP

Tel.:
1-888-945-2872
Fax.:
1-770-338-5118
info@wika.com

FAQ

Why should Pt100 measuring circuits with reduced tolerance class A or AA per DIN EN 60751 be used in at least a 3- or 4-wire connection?

The 2-wire connection is not permissible for classes A and AA per DIN EN 60751 since here the internal lead resistance of the wires is added to the measured value here. This will usually exceed the specified tolerance for the thermometer. A measurement of the cable ... More

What effect does poor insulation resistance have?

In accordance with DIN EN 60751 section 6.3.1 the insulation resistance between each measuring circuit and the sheath, at a minimum test voltage of 100 V DC, must not be less than 100 MOhm. Should the insulation resistance be too low, a measuring error occurs that ... More

Wish list - Documents (0)

There are currently no documents on your wish list. You can add any document from the download area to your wish list. To do this, select the desired language using the flag symbol.

The maximum number of 20 entries was reached.

To receive your download link via e-mail, enter your address here:

The e-mail address is invalid.